MacOS 8.0 set-up
The following instruction is for MacOS 8.0
If you need any assistance with
your account please call us at (801)
498-7473.
|
|
TCP/IP:
1.Go to the
Apple Menu (top left corner),
select
Control Panels and
TCP/IP
2.Select
User Mode from the
Edit menu.
3.Click
Advanced
4.Click the
OK button
5. In
Connect via select
PPP
6. In
Configure select
Using PPP Server
7. Look for
Name Server Addr. in the bottom left corner and type:
205.244.47.6
205.244.47.8
8. To the right of Name Server Addr. you will see
Additional Search domains: please change
it to Webpipe.net
9.Close the TCP/IP Control Panel and save the changes.
1. Go to the Apple Menu (top left corner), select "Control Panels" and "Remote Access".
(If you are using System 8.0 or 8.1 it is called "PPP")
2.In the field labeled
User name:, enter your Webpipe account name.
3.In the field labeled
Password:, enter your password.
4. Check
Save Password
5. Type the Webpipe modem number for your area.
Click here for access number.
6.Click
Options.
7.Under the
Redialing tab,
choose
Redial main number only
8.In
Redial type
100
9.Click the
Connection tab.
10.Check
Use verbose logging
11. Click the
Protocol tab.
12.Under
Use protocol select
PPP
13.Check
Allow error correction and compression in modem
14.All other options should be unchecked.
15.Click
OK and save changes.
When you are finished with the remaining configuration instructions,
clicking
Connect in the bottom right
corner will let you connect to the Internet.
1.Go to the
Apple Menu (top left corner),
select
Control Panels and
Modem.
2.In
Connect via: select
Modem Port
3.In
Modem: select the modem you have from the list.
If you have an iMac,
iMac Internal 56k should already be selected.
1. Go to the
Apple Menu (top left corner),
select
Control Panels and
Internet.
2. Click the
Personal tab.
3. Type your real name, if you want.
4. Type your Webpipe email address (accountname@Webpipe.net)
5.Click the
E-mail tab.
6.Type your
Webpipe account name (do NOT type @webpipe.net)
7.Type
mail.webpipe.net for the mail server.
8.Type your
password.
9.Type
webpipe.net for the SMTP server.
10.At the bottom of the window, select your preferred
E-mail Application.
11.Close the window and save the changes.
You are now ready to be connect to Webpipe.
