Access Number
Depending upon where you
are located you will need to change your access number
to 383-;0167 or 317-0010. If you live south of Clearfield
please change your number to 383-0167. From Clearfield
and north of it please change your number to 317-0010.
Morgan/Hunstville Area will not have to change anything.
If you need any assistance please call us at (801)
498-7473 in Ogden or (801) 266-9393 in Salt Lake City.
We are committed to helping you with your internet service.
We have provide instructions on how to change your access number.
Please choose from the following options:
2.In the column on the right you will see Connect To, from the
Connect To menu click Show all connections
3.This will open the Network Connections screen. Here you should see an icon
for your Webpipe connection. Right click on the Webpipe icon
and choose properties from the menu.
4.This opens the properties screen for the connection. Right here is where you will
find the access number your computer is dialing. Remove the number that is there and
replace it with one of the numbers mentioned above.
5.Click OK at the bottom of the properties screen and
close the Network Connections screen.
2.Go to Settings and click on Network and Dial-up Connections.
3.Here on the Network and Dial-Up Connections screen you should see an icon for your Webpipe
connection. Right click on the Webpipe icon and choose
properties from the menu.
4.This opens the properties screen for the connection. Right here is where you will find the access number your computer is dialing. Remove the number that is there and replace it with one of the numbers mentioned above.
5.Click OK at the bottom of the properties screen and close the Network and Dial-up Connections screen.
3.Here on the Dial-up Networking screen you should see an icon for your Webpipe
connection. Right click on the Webpipe icon and
choose properties from the menu.
4.This opens the properties screen for the connection. Right here is where you will
find the access number your computer is dialing. Remove the number that is there and
replace it with one of the numbers mentioned above.
5.Click OK at the bottom of the properties screen
and close the Dial-up Networking screen.
1.Double click the My Computer icon on your desktop.
2.Double click the Dial-up Networking icon located
inside of My Computer
3.Here on the Dial-up Networking screen you should see an icon for your Webpipe
connection. Right click on the Webpipe icon and choose
properties from the menu.
4.This opens the properties screen for the connection. Right here is where you will find the
access number your computer is dialing. Remove the number that is there and replace it with
one of the numbers mentioned above.
5.Click OK at the bottom of the properties screen and
close the Dial-up Networking screen.
1.Double click the My Computer icon on your desktop.
2.Double click the Dial-up Networking icon located
inside of My Computer
3.Here on the Dial-up Networking screen you should see an icon for your Webpipe
connection. Right click on the Webpipe icon and choose
properties from the menu.
4.This opens the properties screen for the connection. Right here is where you will find the
access number your computer is dialing. Remove the number that is there and replace it with
one of the numbers mentioned above.
5.Click OK at the bottom of the properties screen and
close the Dial-up Networking screen.
3.Along the top of the System Preferences screen click on
Network.
4.On the Network screen click on the tab that says
PPP.
5.Right here is where you will find the access number your computer is dialing.
Remove the number that is there and replace it with one of the numbers mentioned above.
6.Click Save in the lower right corner and
close the Network screen.
3.Right here is where you will find the access number your computer is dialing.
Remove the number that is there and replace it with one of the numbers mentioned above.
4.Click the Close box in the top left corner,
then click Save when prompted.
